STRAIN GAUGE PIEZOMETER SGP-3400 SERIES
The SGP-3400 Series of strain gauge piezometers are designed for monitoring soil pore pressure or changes in water level and are also suitable for dynamic monitoring such as pumping tests.
They are accurate, highly-reliable and suitable for use in the harsh environments often found within civil engineering including water wells, boreholes, dams, reservoirs, rivers, tanks or any other body of water.
The sensor is housed in a robust stainless steel sealed body with a porous filter tip, which are available in different porosities to suit specific site conditions.
It comprises a highly sensitive stainless steel diaphragm onto which a Wheatstone bridge strain gauge is mounted and connected to a signal-conditioning board to convert to a 4-20mA output within the piezometer housing.
When liquid pressure is applied to the diaphragm it causes the Wheatstone bridge strain gauge to output a signal, which is directly proportional to the applied pressure.
They are available in standard or vented versions and can be read by simple hand held readout units or integrated into a data logger for fully automated monitoring.
| Brands | Geosense |
|---|---|
| Pressure Range | 100, 200, 350, 700, 2000, 3500 kPa |
| Over Range | 1.5 |
| Accuracy | <0.1% FS |
| Thermal error | <0.04% FS/°C |
| Temperature range | -20 to +80°C |
| Output | 4-20 mA |
Related products
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
SUBMERSIBLE TILT METER
In stock
STANDPIPE PIEZOMETER
In stock
TILT BEAM MEMS
In stock
MEMS Tilt Beams are designed for attachment to structures, on either a vertical or horizontal surface, for the measurement of tilt or differential settlement.
They consist of a highly accurate MEMS sensor housed in a fully sealed enclosure which is mounted on a lightweight rigid GRP beam. This can be mounted onto the structure using special anchors. The GRP beam has a very low coefficient of thermal expansion meaning that thermal affects are minimised.
WATER LEVEL METER
In stock
PENDULUM SYSTEM
In stock
HPS-3500 (Hanging) and IPS-3000 (Inverted) Pendulums are used to measure the tilt or rotation by measuring the relative internal horizontal displacement of points along a true vertical line. Each has a tensioned, stainless steel wire and the effects of the earth gravitational forces to guarantee a perfectly vertical line between a fixed point and a tensioning mechanism. Typical applications include concrete dams, bridges and high rise buildings.
INCLINOMETER SPIRAL SENSOR
In stock
REED SWITCH PROBE
In stock
Reviews
There are no reviews yet.