VWPHT-3600 SERIES
The VWPHT-3600 series High Temperature Piezometers are suitable for the extreme environments of temperature and pressure found within applications such as geothermal heat and enhanced oil recovery systems including steam assisted gravity drainage (SAGD) and cyclic steam stimulation (CSS). They are capable of monitoring high temperatures up to 250°C and pressures up to 34.5 MPa.
Description
They use the well-proven vibrating wire technology of converting fluid pressures onto a pressure sensitive diaphragm which when deflected causes a change in tension and the corresponding change of frequency of the wire. In addition, an internal high temperature thermistor allows the temperature at the piezometer location to be measured.
Manufactured from high temperature and corrosion-resistant materials throughout, together with a comprehensive temperature calibration, they provide high accuracy stable long-term data with no zero shift.
The specially-designed Tubular Encapsulated Cable (TEC) is both high temperature resistant and highly flexible for easy installation within boreholes or above ground.
Also available as a pressure transducer with a threaded connection in the base.
Additional information
| Brands | |
|---|---|
| Pressure range |
2.1, 3.5, 5.2, 6.9, 10.4, 13.8, 20.7, 34.5 MPa |
| Calibration range |
VWPHT-3600: +20 to + 200°C; VWPHT-3610: +20 to + 250°C |
| Operating range |
VWPHT-3600: 0 to + 200°C; VWPHT-3610: 0 to + 250°C |
| Thermistor Type |
VWPHT-3600: 3K; VWPHT-3610: 10K |
Reviews (0)
About brand
Geosense Ltd is one of Europe’s leading manufacturers and suppliers of instruments to the geotechnical, civil engineering, mining and environmental industries.
Geosense products are used globally in major projects in more than 68 countries. With a comprehensive in-house design and manufacturing capability, we can provide products not only to tight deadlines but also to suit custom-engineered solutions for specific project requirements.
Geosense specialises in the manufacture of vibrating wire and MEMS sensors, which are used to produce a wide range of instruments. In addition we manufacture automated data acquisition systems to complement our sensors, including wireless systems.
Data Sheets
Related products
IPX IN-PLACE EXTENSOMETER
In stock
The In-Place Extensometer (IPX) offers automated monitoring of standard magnetic extensometer installations. The system is designed for a simple, adaptable installation with a single cable connection at the top of the borehole. Its large measurement range accommodates large levels of settlement or heave, and ease of adjustment means it can be reconfigured for changed site conditions such as embankment filling or cutting.
BOREHOLE ROD EXTENSOMETER
In stock
The Geosense® GEO-XB2 borehole rod type extensometer range is used to measure and locate settlement, displacement and deformation in soil and rock.
It consists of a reference head and one or more in-hole anchors each of which is placed at a known depth and connected to the reference head by either a rigid or flexible rod running inside a flexible sleeve, which keeps the rod de-bonded from the grout.
MULTI-POINT VW PIEZOMETER
In stock
DRIVE-IN PIEZOMETERS WP-3400 & SGP-3500 SERIES
In stock
Drive-in piezometers, also referred to as push-in piezometers, are designed for installing in soft clays, organic or fine grained cohesionless soils typically with a SPT-N value less than 10. They are available with a CPT fitting or 1” BSP thread.
Depending on the depth and type of soil, they can either be pushed directly into the soil from ground level to the required depth or pushed into the base of a CPT test or drilled borehole.
TRIAXIAL TILT SENSOR NODE
In stock
IN-PLACE TILT METER MEMS
In stock
INCLINOMETER CASING QJ
In stock
INCLINOMETER CASING XC
In stock
Reviews
There are no reviews yet.